00001 /* 00002 * Copyright (c) 2008 Swedish Institute of Computer Science 00003 * All rights reserved. 00004 * 00005 * Redistribution and use in source and binary forms, with or without 00006 * modification, are permitted provided that the following conditions are met: 00007 * 00008 * * Redistributions of source code must retain the above copyright 00009 * notice, this list of conditions and the following disclaimer. 00010 * * Redistributions in binary form must reproduce the above copyright 00011 * notice, this list of conditions and the following disclaimer in 00012 * the documentation and/or other materials provided with the 00013 * distribution. 00014 * * Neither the name of the copyright holders nor the names of 00015 * contributors may be used to endorse or promote products derived 00016 * from this software without specific prior written permission. 00017 * 00018 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" 00019 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 00020 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 00021 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE 00022 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 00023 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 00024 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 00025 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 00026 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 00027 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 00028 * POSSIBILITY OF SUCH DAMAGE. 00029 */ 00030 /** 00031 * \file 00032 * 00033 * \brief 00034 * Interface for the onboard temperature sensor. 00035 * 00036 * \author 00037 * Mike Vidales mavida404@gmail.com 00038 * 00039 */ 00040 00041 #ifndef __TEMP_H__ 00042 #define __TEMP_H__ 00043 00044 00045 #include <stdint.h> 00046 #include <stdlib.h> 00047 #include <stdio.h> 00048 #include "adc.h" 00049 00050 #define PROGMEM_DECLARE(x) x __attribute__((__progmem__)) 00051 00052 /** \addtogroup lcd */ 00053 /** \{ */ 00054 /** Type used with \ref temp_get() to select temperature unit */ 00055 typedef enum { 00056 TEMP_UNIT_CELCIUS, 00057 TEMP_UNIT_FAHRENHEIT 00058 } temp_unit_t; 00059 00060 /** \name Definition of Port Pin for temp sensor. */ 00061 /** \{ */ 00062 #define TEMP_PORT PORTF 00063 #define TEMP_DDR DDRF 00064 #define TEMP_PIN PINF 00065 #define TEMP_BIT_IN 4 00066 #define TEMP_BIT_PWR 6 00067 /** \} */ 00068 00069 /** \brief Initialize the temperature sensor 00070 * ADC2=EXT_SUPL_SIG can also be measured and sent 00071 * to the 1284p along with the temperature reading. 00072 * 00073 * \return EOF on error 00074 */ 00075 #define MEASURE_ADC2 1 //adds 250 bytes to program size 00076 int temp_init(void); 00077 00078 00079 /** \brief De-initialize the temperature sensor 00080 * 00081 */ 00082 void temp_deinit(void); 00083 00084 /** \brief Read current temperature 00085 * 00086 * \param[in] unit Selected temperature unit (\ref temp_unit_t) 00087 * 00088 * 00089 * \return EOF on error 00090 */ 00091 int16_t temp_get(temp_unit_t unit); 00092 /** \} */ 00093 #endif /* __TEMP_H__ */