contiki-stk501-default-init-lowlevel.c

00001 /*
00002  * Copyright (c) 2006, Technical University of Munich
00003  * All rights reserved.
00004  *
00005  * Redistribution and use in source and binary forms, with or without
00006  * modification, are permitted provided that the following conditions
00007  * are met:
00008  * 1. Redistributions of source code must retain the above copyright
00009  *    notice, this list of conditions and the following disclaimer.
00010  * 2. Redistributions in binary form must reproduce the above copyright
00011  *    notice, this list of conditions and the following disclaimer in the
00012  *    documentation and/or other materials provided with the distribution.
00013  * 3. Neither the name of the Institute nor the names of its contributors
00014  *    may be used to endorse or promote products derived from this software
00015  *    without specific prior written permission.
00016  *
00017  * THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
00018  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
00019  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
00020  * ARE DISCLAIMED.  IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
00021  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
00022  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
00023  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
00024  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
00025  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
00026  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
00027  * SUCH DAMAGE.
00028  *
00029  * This file is part of the Contiki operating system.
00030  *
00031  * Author: Simon Barner <barner@in.tum.de>
00032  *
00033  * @(#)$$
00034  */
00035 #include "contiki-stk501.h"
00036 
00037 void
00038 init_lowlevel(void)
00039 {
00040   /* Configure default slip port with 115200 baud */
00041   rs232_init(RS232_PORT_0, USART_BAUD_115200, USART_PARITY_NONE | USART_STOP_BITS_1 | USART_DATA_BITS_8);
00042 
00043   /* Second rs232 port for debugging */
00044   rs232_init(RS232_PORT_1, USART_BAUD_9600, USART_PARITY_NONE | USART_STOP_BITS_1 | USART_DATA_BITS_8);
00045 
00046   /* Redirect stdout to second port */
00047   rs232_redirect_stdout (RS232_PORT_1);
00048 }