cdc_eem_nonrq.c

#include "cdc_eem.h"
#include "contiki.h"
#include "usb_drv.h"
#include "usb_descriptors.h"
#include "usb_specific_request.h"
#include "rndis/rndis_task.h"
#include "rndis/rndis_protocol.h"
#include "uip.h"
#include "sicslow_ethernet.h"
#include <stdio.h>

#include <avr/pgmspace.h>
#include <util/delay.h>

#define BUF ((struct uip_eth_hdr *)&uip_buf[0])
#define PRINTF printf
#define PRINTF_P printf_P

extern uint8_t usb_eth_data_buffer[64];


//_____ M A C R O S ________________________________________________________


#define EEMCMD_ECHO                    0x00 ///bmEEMCmd Echo
#define EEMCMD_ECHO_RESPONSE           0x01 ///bmEEMCmd Echo Response
#define EEMCMD_SUSPEND_HINT            0x02 ///bmEEMCmd Suspend Hint
#define EEMCMD_RESPONSE_HINT           0x03 ///bmEEMCmd Response Hint
#define EEMCMD_RESPONSE_COMPLETE_HINT  0x04 ///bmEEMCmd Response Complete Hint
#define EEMCMD_TICKLE                  0x05 ///bmEEMCmd Tickle


void cdc_eem_configure_endpoints() {
        usb_configure_endpoint(TX_EP,         \
                                          TYPE_BULK,     \
                                          DIRECTION_IN,  \
                                          SIZE_64,       \
                                          TWO_BANKS,     \
                                          NYET_ENABLED);

        usb_configure_endpoint(RX_EP,          \
                                                  TYPE_BULK,     \
                                          DIRECTION_OUT, \
                                          SIZE_64,       \
                                          TWO_BANKS,     \
                                          NYET_ENABLED);
        Usb_reset_endpoint(TX_EP);
        Usb_reset_endpoint(RX_EP);
}

void cdc_eem_process(void) {
        uint16_t datalength;
        uint8_t bytecounter, headercounter;
        uint16_t i;

#ifdef USB_ETH_HOOK_INIT
        static uint8_t doInit = 1;
        if (doInit) {
                USB_ETH_HOOK_INIT();
                doInit = 0;
        }
#endif

        //Connected!
        Led0_on();

        Usb_select_endpoint(RX_EP);

        //If we have data and a free buffer
        if(Is_usb_receive_out() && (uip_len == 0)) {

                //Read how much (endpoint only stores up to 64 bytes anyway)
                bytecounter = Usb_byte_counter_8();

                //EEM uses 2 bytes as a header
                headercounter = 2;

                uint8_t fail = 0;

                //Hmm.. what's going on here?
                 if (bytecounter < headercounter) {
                         Usb_ack_receive_out();
                                        //TODO CO done = 1;
                 }

                 //Read EEM Header
                 i = 0;
                 while (headercounter) {
                        usb_eth_data_buffer[i] = Usb_read_byte();
                        bytecounter--;
                        headercounter--;
                        i++;
                 }

                //Order is LSB/MSB, so MSN is in usb_eth_data_buffer[1]
                //Bit 15 indicates command packet when set
                if (usb_eth_data_buffer[1] & 0x80) {
                        //not a data payload
                        datalength = 0;
                } else {
                        //'0' indicates data packet
                        //Length is lower 14 bits
                        datalength = usb_eth_data_buffer[0] | ((usb_eth_data_buffer[1] & 0x3F) << 8);
                }

                /* EEM Command Packet */
                if ((datalength == 0) && (fail == 0))
                {
                        uint8_t command;
                        uint16_t echoLength;

                        //Strip command off
                        command = usb_eth_data_buffer[1] & 0x38;
                        command = command >> 3;

                        //Decode command type
                        switch (command)
                        {
                                /* Echo Request */
                                case EEMCMD_ECHO:

                                        //Get echo length
                                        echoLength  = (usb_eth_data_buffer[1] & 0x07) << 8; //MSB
                                        echoLength |= usb_eth_data_buffer[0];               //LSB

                                        //TODO: everything. oops.

                                        break;

                                /* Everything else: Whatever. */
                                case EEMCMD_ECHO_RESPONSE:
                                case EEMCMD_SUSPEND_HINT:
                                case EEMCMD_RESPONSE_HINT:
                                case EEMCMD_RESPONSE_COMPLETE_HINT:
                                case EEMCMD_TICKLE:
                                        break;

                                default: break;
                        }
                }
                /* EEM Data Packet */
                else if (datalength && (fail == 0))
                {
                        //Looks like we've got a live one
#ifdef USB_ETH_HOOK_RX_START
                        USB_ETH_HOOK_RX_START();
#endif

                        uint16_t bytes_received = 0;
                        uint16_t dataleft = datalength;
                        U8 * buffer = uip_buf;

                        while(dataleft)
                        {
                                *buffer++ = Usb_read_byte();

                                dataleft--;
                                bytecounter--;
                                bytes_received++;

                                //Check if endpoint is done but we are expecting more data
                                if ((bytecounter == 0) && (dataleft))
                                {
                                        //ACK previous data
                                        Usb_ack_receive_out();

                                        //Wait for new data
                                        while (!Is_usb_receive_out());

                                        //Get new data
                                        bytecounter = Usb_byte_counter_8();

                                        //ZLP?
                                        if (bytecounter == 0)
                                        {
                                                //Incomplete!!
                                                break;
                                        }
                                }
                        }

                        //Ack final data packet
                        Usb_ack_receive_out();

#ifdef USB_ETH_HOOK_RX_END
                        USB_ETH_HOOK_RX_END();
#endif

                        //Packet has CRC, nobody wants that garbage
                        datalength -= 4;

                        //Send data over RF or to local stack
                        if(datalength <= USB_ETH_MTU) {
                                USB_ETH_HOOK_HANDLE_INBOUND_PACKET(uip_buf,datalength);
                        } else {
                                USB_ETH_HOOK_RX_ERROR("Oversized packet");
                        }
                } //if (datalength)
        }  //if(Is_usb_receive_out() && (uip_len == 0))
}


/**
 \brief Send a single ethernet frame using EEM
 */
uint8_t eem_send(uint8_t * senddata, uint16_t sendlen, uint8_t led)
{
        //Make a header
        uint8_t header[2];

        //Fake CRC! Add 4 to length for CRC
        sendlen += 4;
        header[0] = (sendlen >> 8) & 0x3f;
        header[1] = sendlen & 0xff;

        //We send CRC seperatly..
        sendlen -= 4;

        //Send Data
        Usb_select_endpoint(TX_EP);
        //Usb_send_in();

        //Wait for ready
        if(usb_endpoint_wait_for_write_enabled()!=0) {
                USB_ETH_HOOK_TX_ERROR("Timeout: write enabled");
                return 0;
        }

#ifdef USB_ETH_HOOK_TX_START
        USB_ETH_HOOK_TX_START();
#endif

        //Send header (LSB then MSB)
        Usb_write_byte(header[1]);
        Usb_write_byte(header[0]);

        //Send packet
        while(sendlen) {
                Usb_write_byte(*senddata);
                senddata++;
                sendlen--;

                //If endpoint is full, send data in
                //And then wait for data to transfer
                if (!Is_usb_write_enabled()) {
                        Usb_send_in();

                        if(usb_endpoint_wait_for_write_enabled()!=0) {
                                USB_ETH_HOOK_TX_ERROR("Timeout: write enabled");
                                return 0;
                        }
                }

        }

        //CRC = 0xdeadbeef
        //Linux kernel 2.6.31 needs 0xdeadbeef in wrong order,
        //like this: uint8_t crc[4] = {0xef, 0xbe, 0xad, 0xde};
        //This is fixed in 2.6.32 to the correct order (0xde, 0xad, 0xbe, 0xef)
        uint8_t crc[4] = {0xde, 0xad, 0xbe, 0xef};

        sendlen = 4;
        uint8_t i = 0;

        //Send fake CRC
        while(sendlen) {
                Usb_write_byte(crc[i]);
                i++;
                sendlen--;

                //If endpoint is full, send data in
                //And then wait for data to transfer
                if (!Is_usb_write_enabled()) {
                        Usb_send_in();
                        if(usb_endpoint_wait_for_write_enabled()!=0) {
                                USB_ETH_HOOK_TX_ERROR("Timeout: write enabled");
                                return 0;
                        }
                }
        }

        //Send last data in - also handles sending a ZLP if needed
        Usb_send_in();

#ifdef USB_ETH_HOOK_TX_END
        USB_ETH_HOOK_TX_END();
#endif

    //Wait for ready
        if(usb_endpoint_wait_for_IN_ready()!=0) {
                USB_ETH_HOOK_TX_ERROR("Timeout: IN ready");
                return 0;
        }

        return 1;
}