Static configuration options
[Configuration options for uIP]

These configuration options can be used for setting the IP address settings statically, but only if UIP_FIXEDADDR is set to 1. More...

Defines
#define	UIP_FIXEDADDR
	Determines if uIP should use a fixed IP address or not.
#define	UIP_PINGADDRCONF
	Ping IP address assignment.
#define	UIP_FIXEDETHADDR
	Specifies if the uIP ARP module should be compiled with a fixed Ethernet MAC address or not.

---

Detailed Description

These configuration options can be used for setting the IP address settings statically, but only if UIP_FIXEDADDR is set to 1.

The configuration options for a specific node includes IP address, netmask and default router as well as the Ethernet address. The netmask, default router and Ethernet address are applicable only if uIP should be run over Ethernet.

This options are meaningful only for the IPv4 code.

All of these should be changed to suit your project.

---

Define Documentation

#define UIP_FIXEDADDR

Determines if uIP should use a fixed IP address or not.

If uIP should use a fixed IP address, the settings are set in the uipopt.h file. If not, the macros uip_sethostaddr(), uip_setdraddr() and uip_setnetmask() should be used instead.

Definition at line 104 of file uipopt.h.

#define UIP_FIXEDETHADDR

Specifies if the uIP ARP module should be compiled with a fixed Ethernet MAC address or not.

If this configuration option is 0, the macro uip_setethaddr() can be used to specify the Ethernet address at run-time.

Definition at line 134 of file uipopt.h.

#define UIP_PINGADDRCONF

Ping IP address assignment.

uIP uses a "ping" packets for setting its own IP address if this option is set. If so, uIP will start with an empty IP address and the destination IP address of the first incoming "ping" (ICMP echo) packet will be used for setting the hosts IP address.

Note:

This works only if UIP_FIXEDADDR is 0.

Definition at line 121 of file uipopt.h.